Made of finest quality steel and properly welded shell are fabricated in a style that makes its placement lifting and placing during the transportation extremely hassle free.
Shell comprises of base frame, peripheral structure, self-draining roof, one entry door and 03 nos. of windows.
We use best quality pressed mild steel channel to produce base frame of shall . The “I” beam of main structural element of shall is 125mm X 75 mm and the size of cross member Of “C” channel section of shall is 100 mm X 50mm.
Side and End Walls
Properly developed pressed section with adequate profiles/pillars with sustainable capacity are used to create side and end frame of shall. Specially corrugated steel of 1.6mm thickness is used to made the exterior wall of shall and 9mm particle is used to in interior walls. Before using we subject steel sheets for rigorous corrosion resistant checking.
Panels shall be vertically corrugated. Sheets shall be continuously welded to top side and base structure so as to offer better strength to weight ratio. All gaps will be sealed at edges and at seam, bottom etc to prevent ingress of moisture.
18 mm thick best quality marine plywood is used at the bottom frame. We use self-tapping screw to fix it. PVC Vinyl flooring shall be fixed on the plywood sheet.
Required expertise used in the roof making to make it properly cambered for draining of rainwater. We use 9mm particle completely insulated board to create interior paneling. The thickness of M.S. Sheet is 1.6mm which used to made self-draining type of roof.
Red oxide primer for Bunk House & chlorinated Rubber for final 2 coats.
We take extra precaution while insulating the wall and frame of shall. We use 50 mm thick Glass wool Insulation shall be used for walls and 75 mm thick insulation material to be provided for roof.
Developing an interior landscape which is designed tastefully we take all the measures to satisfy the client preference by blending best quality material with high quality craftsmanship. All vertically and horizontal corners shall be neatly and smoothly finished with Aluminum sections. The Paneling of side walls and roof shall be of 9 mm thick decorative laminated board.
Main Entry Door
The dimensions of the door shall be of 6' hight x 3 ' width. The door shall be of external opening type made out of the same material as wall panels with door closing unit. The construction of the door shall be double skin steel construction with 40 mm thick glass wool insulation. The peripheral edges of the door shall be sealed with double gaskets to make it waterproof & leak proof. The door interior shall be finished with same material matching with that of the bunk house interior. The door shall be provided with locking arrangement with separate handles on both sides of the door as required. Main door will be insulated and fitted with Godrej Mortise lock and power bolt.
03 number of Aluminum powder coated windows, sliding type shall be provided, made of Aluminum section, 5 mm thick, clear vision glasses are to be fitted to it.
The Cabins will be provided with electrical wiring suitable for 250 volt, 50 HZ single phase AC power supply. All electrical wiring shall be concealed. Bulk head and 2 nos. of tube lights shall be provided . Suitable copper cables shall be used for lighting circuits. The copper cables used will be of 3/1.9 cable for lighting circuits. ISI mark and concealed in PVC conduits insulated copper wire shall be used for wiring to be done in PVC conduit with small size distribution board with MCB protection and to separate with main supply.
a) 4 nos. of switch socket of 5/15 Amp & one no. of switch socket of 20 Amp with MCB (62 ampere TPN).
b) 2 tube lights (one to one opposite side).
c) two nos. of wall mounted fans.
d) Main incoming junction box/ metal clad plug socket.
e) 2 nos. of telephone points.